Product Details: No-slip Strips, Carpeted Stairs
Carpeted stairs present slipping risks. Our patented slip-resistant nosing stops your feet from slipping by providing just the right amount of skid-resistant traction.
Watch Video, See How It Works
See All Colors. Average product life is 7 years.
HOW IT FEELS: Feels sturdy under your foot and provides SOLID non-slip traction. It is NOT SOFT.
HOW IT WORKS: The “Base-Strip” stabilizes the carpet and any padding - see above video overview. Patented Design conforms to the shape and height of your carpet during installation. The peel-N-stick “Traction-Tape” provides the non-skid gripper so your foot does not slip.
CERTIFIED TRACTION: No-slip Strips have been tested and approved by the National Floor Safety Institute (NFSI) and exceeds OSHA and ADA safety standards.
EVERYTHING INCLUDED: 1) Base-Strips made from aluminum - thickness of 0.04 inches, 2) retaining Screws - 1.25" each and similar to what's currently underneath your carpet, 3) Bridge-Strips, 4) Traction-Tapes, and 5) detailed Instructions.
We stock the following lengths : 10 inches, 13", 16", 19", 22", 25", 28", 31", 34", 37", 40", 43", 46", 49", 52", 55", 58", and 61 inches. Width is 2 inches. All strips have a thickness of 0.04".
Pricing is per strip. This allows customers to order only what they need. Longer lengths cost a bit more. Price also vary for certain colors. You will see total price when you go to View Cart.
How To Order
Step 1. Measure the length of each step (longest side of carpeted tread) and subtract 6 inches. The result is your maximum recommended length to order. This will give you 3 inches of clearance on either side. So if your stairs measure at 40 inches in length, then subtract 6 inches and order strips that are 34 inches in length. It is ok to order a shorter length and we recommend not exceeding your maximum recommended length.
Step 2. Decide on a color. See All Colors.
Step 3. Go to the order page and choose the Size, Color, and Quantity you want to order. Click "Add to Cart" button and complete checkout.
Required: Power-Screwdriver with adjustable torque settings
Step 1. Place the aluminum Base-Strip about 1.5" from edge of step. Indicator on base-strip shows you which side must face the front of step.
Step 2. Install retaining screws per supplied instructions. Screws should not push against your feet when you stand on the Base-Strip.
Step 3. Apply peel-n-stick Bridge-Strips and/or Traction-Tape on top of installed base-strip.
"No-slip Strip" Installation Video
"Bridge-Strips" Installation Video
"No-slip Strip" Frequently Asked Questions