No-slip Tapes stair safety pre-cut strips and rolls; helps prevent people and pets from slipping down slippery stairs. For Wood, Laminate, Marble, etc.

FAQs:

1)Safety Certification; 2)FREE SAMPLES; 3)Installation; 4)Will No-slip Tapes damage my stairs? 5)Removal; 6)Cleaning; 7)Sizes; 8)COLORS; 9)Pricing; 10)How To Order; 11)Measure-N-Align Technology; 12)Compare Super Grip 4 vs Comfort Grip; 13)Pre-cut vs Roll; 14)Rounded Corners vs Square Corners; 15)Shipping; 16)International Shipping; 17)Returns; 18)Distributors; 19)Warranty; 20)Product Life;

 

Will the No-slip Tapes damage my stairs?
In our testing No-slip Tapes did not damage the stairs. However because stairs conditions vary, we make available free evaluation samples. You may request evaluation samples prior to ordering. Moreover free evaluation samples ship along with every order. Our solution balances safety, ease of application, and removal. However user is solely responsible for evaluating the product and determining suitability. On most surfaces you should be able to hand-peel, with some effort, to remove. See helpful installation and removal tips here. Watch video below to learn more.

 

What is the difference between "Clear-Transparent Grit II, Comfort Grip" and "Super Grip 4"?

Comfort Grip does not feel like sandpaper and it is 30% more transparent. Rubber-like composition naturally repels dirt. Super Grip 4 feels like 80 grit sandpaper. Following are some installation pictures to illustrate the differences between "Super Grip 4" traction and "Comfort Grip". 

 

CLOSE-UP VIEWS

ON HICKORY

 

 

 

CLOSE-UP VIEWS

ON OAK

 

 

 

CLOSE-UP VIEWS

ON MAPLE

  

 

 

CLOSE-UP VIEWS

ON BAMBOO

 

 

 

CLOSE-UP VIEWS

ON TILE

 

 

 ALMOST INVISIBLE

Clear-Transparent Grit II, Comfort Grip 

PRODUCT DETAILS:

 

 

 

 

CERTIFIED TRACTION: Certified by the National Floor Safety Institute (NFSI) and also exceeds OSHA and ADA safety standards.

WARRANTY NOTICE: Average product life is 5 years. Return any product within 30 days, no questions asked. Please read our Returns Policy here. Also our solution has been tested for safety, ease of application, and removal. However due to varying user environmental factors, user is solely responsible for evaluating the product and determining suitability. Every order ships with free samples for you to evaluate installation and removal. On most surfaces you should be able to hand-peel, with some effort, to remove. You may request free samples prior to ordering. Please use free sample to test and determine suitability on your surface.

 

 

What other colors are available?

Click button below to see all colors.

 

Do you have free samples?
Yes, click button below to order free samples.

 

What is the difference between Rounded Corners vs. Square Corners?
Rounded Corners have a slight radius as indicated in comparison below. Frankly the technology has improved so much that the difference between the two is largely aesthetic. It used to be that the rounded corners improved product life but this is no longer the case. So you’ll be fine with either rounded or square corners. We currently offer just one size with rounded corners and it is 24 x 6 inches.

How is the solution priced?
The solution is priced per roll or pre-cut strip.

What is your exclusive Measure-N-Align Technology?
Our exclusive Measure-N-Align Technology makes an already easy installation easier with a built-in alignment guide.

Measure-N-Align Technology eliminates installation alignment mistakes. Simply align the extended flap with the non-curved edge of each step as shown below. Your installation will be nice and straight every time with no mistakes.

At this time Measure-N-Align Technology is available on 43 inches or longer lengths of the Clear-Transparent Grit II, Comfort Grip pre-cut strips.

 

Installation
Please review instructions and video below.

Required: Roller

Step 1. Clean stair surface and hands – surfaces and hands must be free from dirt and oils. Use rubbing alcohol to clean. The alcohol will remove any oils and give you clean dry surfaces in minutes. It is very important that surfaces are completely dry and surface temperature must be above 60˚F. See helpful installation and removal tips here.

Step 2. Peel backing paper about three inches to expose adhesive and place No-slip Tape about half an inch from non -curved edge of step. Apply roller pressure to remove any trapped bubble. Repeat every 3 inches until backing paper is completely removed and No-slip Tape is secure on stair tread. Do not install No-slip Tape on the very edge of step. Doing so will reduce product life. Install only on a flat surface. Use a Roller to activate adhesive. Rolling will also permit the sub-surface color to transmit through our "Clear" non-slip material and create near-transparency.

Watch Video: Product Installation

 

Note: Use our optional Edge Sealer if you have extremely high traffic or the environment has low humidity.

Parallel Strips Application (optional): You can achieve more surface area coverage by installing two or more strips in parallel and about an inch apart. Our research revealed that the ball of your foot will often find a landing between the parallel strips and give you superior non-slip confidence when engaging the stairs. However a single strip per step will also provide adequate traction.

 

Click here to see No-slip Strips installation as featured on NBC's Today Show along with other handy products.

How long with the No-slip Tapes solution last? Will the edges roll-up over time?
Average life is 5 years. Environmental conditions can reduce product life. For example, the presence of small contaminants like oils on the stairs during installation may reduce or prevent adhesion. Low humidity may also prematurely dry-up the adhesive. We recommend the Edge Sealer in low humidity environments.

Can I remove No-slip Tapes later?
Yes our solution balances safety, ease of application, and removal. On most surfaces you should be able to hand-peel, with some effort, to remove. You may request Free Samples prior to ordering No-slip Tapes. We also ship free samples along with all orders. See helpful installation and removal tips here.


How do I clean No-slip Tapes?
Clean No-slip Tapes with a damp cloth.

What sizes are available?
Pre-cut strips lengths range from 10 inches to 52 inches. Max roll length is 720 inches.

How to Order?
Please measure the length of each step and subtract 2 inches.

Should I buy the pre-cut strips or rolls?
We recommend our pre-cut strips for ease of installation. However if you have many steps, and a good pair of scissors for cutting, then a roll of No-slip Tapes may offer a cost savings. So price both and compare.

What is your Shipping Policy? When will my order arrive?
We ship Worldwide. On average it takes 1 to 4 business days for an order to be processed and leave our facility in Gaithersburg MD USA. However we strive to ship next day. Click here to learn more. Transit time depends on the shipping option you choose during checkout. For example USPS Priority Mail average 1-3 business days within continental United States.

Do you have a local distributor?
We ship Worldwide - Canada, UK, Australia, etc. For example we ship to Canada and the UK daily.

Will you ship international?
Yes we ship international: Canada, UK, Australia, etc.

 

 

What is your Return Policy?
Return any product within 30 days, no questions asked. Please read our Returns Policy here.